Fix help page install location.

Rework of the help page, README and INSTALL files.

Signed-off-by: gregory guy <gregory-tde@laposte.net>

3 files changed, 40 insertions, 234 deletions

diff --git a/INSTALL b/INSTALL
index f8bad0c..bbf365d 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,176 +1,16 @@
 Basic Installation
 ==================
 
-   These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
-   The file `configure.in' is used to create `configure' by a program
-called `autoconf'.  You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes a while.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
-initial values for variables by setting them in the environment.  Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory.  After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/kde/bin', `/usr/local/kde/lib', etc.  You can specify an
-installation prefix other than `/usr/local/kde' by giving `configure'
-the option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
-     CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
-   If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
-`--help'
-     Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--version'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
-
+mathemagics relies on cmake to build.
+
+Here are suggested default options:
+
+ -DCMAKE_INSTALL_PREFIX="/opt/trinity" \
+ -DCONFIG_INSTALL_DIR="/etc/trinity" \
+ -DSYSCONF_INSTALL_DIR="/etc/trinity" \
+ -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
+ -DCMAKE_BUILD_TYPE=RelWithDebInfo \
+ -DCMAKE_VERBOSE_MAKEFILE="ON" \
+ -DCMAKE_SKIP_RPATH="OFF" \
+ -DBUILD_ALL="ON" \
+ -DWITH_ALL_OPTIONS="ON"
diff --git a/README b/README
index 86194e5..8125a9d 100644
--- a/README
+++ b/README
@@ -1,63 +1,19 @@
-What is kdenonbeta?
--------------------
 
-This package contains software modules that are considered by their
-authors preceding beta stage, hence "nonbeta" (which means "alpha at
-best"), and are not normally released. The programs and libraries that
-are developed here are sometimes moved to official release packages
-(like tdegraphics) as the program or library matures to a sufficiently
-stable state. Beware that some of the programs are not maintained or
-may be suffering bit rot.
+mathemagics - a RPN scientific calculator for TDE.
 
-This place is also touted as a place for free collaborative development of
-KDE related software.
 
+Mathemagics makes use of the Reverse Polish Notation or RPN.
+Mathemagics can store and use user-defined functions and variables, It
+comes with large number of built-in functions as well.
 
-Package contents
-----------------
 
-Read the INDEX file to find out about the description and status of each
-module.
+CONTRIBUTING
+==============
 
+If you wish to contribute to Mathemagics, you might do so:
 
-Building kdenonbeta
--------------------
+- TDE Gitea Workspace (TGW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/gitea
 
-kdenonbeta is fairly large, at around 170 Mbytes of source code. That
-much code in active development means that it is unlikely all of
-kdenonbeta will compile and work at once. You probably don't want to
-build all of kdenonbeta - pick the bits you are interested in and just
-build that.
-
-There are a number of ways to manage the build process:
-
-1. Only checkout what you need. If you use a sequence like 
-   cvs co -l kdenonbeta
-   cd kdenonbeta
-   cvs co admin  (or ln -s ../kde-common/admin ./admin)
-   cvs up <subdir>
-you will only get the active directories. This is a good idea in terms
-of build time, and also on load on the CVS servers.
-
-2. Create a file called inst-apps in the toplevel directory to compile
-modules you want. The file should contain each module name on a
-separate line, like:
-    konversation
-    kttsd
-Then do your make -f Makefile.cvs && ./configure etc.
-
-3. Exclude the modules you don't want, by adding them to the
-DO_NOT_COMPILE variable. For example, if you want to exclude
-dcopbindings, then edit dcopbindings/configure.in.in to include the
-line:
-    DO_NOT_COMPILE="$DO_NOT_COMPILE dcopbindings"
-
-
-Using kdenonbeta
----------------
-
-The package uses the standard autoconf/automake based KDE build system. To
-add a new module to the build, create a subdirectory with your code and then
-say "make -f Makefile.cvs".
-
-Don't forget to add your new subdirectory to the INDEX file.
+- TDE Weblate Translation Workspace (TWTW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/weblate
diff --git a/doc/mathemagics/index.docbook b/doc/en/index.docbook
index ff1092c..ed37e23 100644
--- a/doc/mathemagics/index.docbook
+++ b/doc/en/index.docbook
@@ -30,7 +30,7 @@
 <date>2002-05-25</date>
 <releaseinfo>1.0</releaseinfo>
 
-<abstract><para>&mathemagics; is a scientific RPN calculator for &kde;.</para></abstract>
+<abstract><para>&mathemagics; is a scientific RPN calculator for &tde;.</para></abstract>
 
 <keywordset>
 <keyword>KDE</keyword>
@@ -263,17 +263,27 @@ XOR (exclusive OR) operation.</term>
 <appendix id="installation">
 <title>Installation</title>
 
-<para>&mathemagics; is part of the &package; package within the &kde; project. For more details about &kde; visit <ulink url="http://www.kde.org">http://www.kde.org</ulink>.</para>
+<para>&mathemagics; is part of the &tde; project. For more details about &tde; visit <ulink url="http://trinitydesktop.org">http://trinitydesktop.org</ulink>.</para>
 
 <para>&mathemagics;'s website is <ulink
-url="http://katzbrown.com/mathemagics/">
-http://katzbrown.com/mathemagics/</ulink></para>
+url="https://mirror.git.trinitydesktop.org/gitea/TDE/mathemagics">
+https://mirror.git.trinitydesktop.org/gitea/TDE/mathemagics</ulink></para>
 
 <sect1 id="compilation-and-installation">
 <title>Compilation and Installation</title>
 
-&install.intro.documentation;
-&install.compile.documentation;
+<para>
+In order to compile and install &mathemagics; on your system, type the following in the base directory; distribution:
+<screen width="40">
+<prompt>%</prompt> <userinput>mkdir -p build</userinput>
+<prompt>%</prompt> <userinput>cd build</userinput>
+<prompt>%</prompt> <userinput>cmake ../</userinput>
+<prompt>%</prompt> <userinput>make</userinput>
+<prompt>%</prompt> <userinput>make install</userinput>
+</screen>
+</para>
+
+<para>Since &mathemagics; uses cmake you should have not trouble compiling it. Default options for cmake build are available in the INSTALL file.</para>
 
 </sect1>
 </appendix>