summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorTimothy Pearson <tpearson@raptorengineering.com>2019-04-28 22:24:04 -0500
committerTimothy Pearson <tpearson@raptorengineering.com>2019-04-28 22:24:04 -0500
commit9db454facad4e36dae8315b5366642fcaf1ec10b (patch)
tree6d010051956ed829af25366dca129427608c017b
parentd64d218d188f76145f4244bc5ac4abf81c9d332c (diff)
downloadulab-9db454facad4e36dae8315b5366642fcaf1ec10b.tar.gz
ulab-9db454facad4e36dae8315b5366642fcaf1ec10b.zip
Slow demo file 7-segment clock to a more reasonable KHz value
-rw-r--r--fpga/serial/lattice/eb85/ice40_remotefpga_test/main.v208
1 files changed, 104 insertions, 104 deletions
diff --git a/fpga/serial/lattice/eb85/ice40_remotefpga_test/main.v b/fpga/serial/lattice/eb85/ice40_remotefpga_test/main.v
index 3c7fa0f..44b1ff5 100644
--- a/fpga/serial/lattice/eb85/ice40_remotefpga_test/main.v
+++ b/fpga/serial/lattice/eb85/ice40_remotefpga_test/main.v
@@ -1,104 +1,104 @@
-// This file is part of the Universal Laboratory (uLab)
-//
-// © 2007 - 2019 Raptor Engineering, LLC
-// All Rights Reserved
-//
-// Licensed under the terms of the AGPL v3
-
-module guest_fpga_top(clk, reset, four_bit_input, four_bit_output, eight_bit_input, eight_bit_output, sixteen_bit_input, sixteen_bit_output, lcd_data_in_address, lcd_data_in_data, lcd_data_in_enable, led_segment_bus, led_digit_select);
- input clk;
- input reset;
-
- input [3:0] four_bit_input;
- output reg [3:0] four_bit_output;
- input [7:0] eight_bit_input;
- output reg [7:0] eight_bit_output;
- input [15:0] sixteen_bit_input;
- output reg [15:0] sixteen_bit_output;
-
- output reg [5:0] lcd_data_in_address;
- output reg [7:0] lcd_data_in_data;
- output reg lcd_data_in_enable;
-
- output reg [7:0] led_segment_bus;
- output reg [3:0] led_digit_select;
-
- reg [7:0] lcd_sample_counter = 48; // Create a sample LCD display counter register
- reg [31:0] lcd_character_change_timer = 0; // Wait a certain number of cycles before loading a new character
- reg [5:0] lcd_current_character = 0; // The current character's address
-
- always @(posedge clk) begin
- four_bit_output = four_bit_input; // Loopback
- eight_bit_output = eight_bit_input[3:0] + eight_bit_input[7:4]; // Sample adder
- sixteen_bit_output = sixteen_bit_input[15:8] * sixteen_bit_input[7:0]; // Sample multiplier
-
- // Sample LCD display routine
- lcd_data_in_address = lcd_current_character; // Character location on the LCD display
- lcd_data_in_data = lcd_sample_counter; // Character code to display
- lcd_data_in_enable = 1; // Enable data transmission
-
- // Cycle through all character positions
- lcd_current_character = lcd_current_character + 1;
- if (lcd_current_character > 31) begin
- lcd_current_character = 16;
- end
-
- // Cycle through the numbers 0 to 9 at one second intervals
- lcd_character_change_timer = lcd_character_change_timer + 1;
- if (lcd_character_change_timer > 6000000) begin // Wait one second in between character changes
- lcd_character_change_timer = 0;
- lcd_sample_counter = lcd_sample_counter + 1;
- if (lcd_sample_counter > 57) begin // Character code for the digit 9
- lcd_sample_counter = 48; // Character code for the digit 0
- end
- end
- end
-
- // 7-segment LED display driver clock generator
- reg sseg_clock;
- reg [4:0] sseg_clock_counter;
-
- always @(posedge clk) begin
- sseg_clock_counter = sseg_clock_counter + 1;
- if (sseg_clock_counter > 16) begin
- sseg_clock_counter = 0;
- sseg_clock = ~sseg_clock;
- end
- end
-
- // 7-segment LED display driver
- // led_segment_bus and led_digit_select are active low
- // The bit sequence, MSB to LSB, is dp a b c d e f g
- // Segment letters are taken from ug130.pdf page 15
-
- // 0: 8'b10000001
- // 1: 8'b11001111
- // 2: 8'b10010010
- // 3: 8'b10000110
- reg [2:0] current_anode;
- always @(posedge sseg_clock) begin
- current_anode = current_anode + 1;
- if (current_anode > 3) begin
- current_anode = 0;
- end
-
- case (current_anode)
- 0: begin
- led_digit_select = 4'b1110;
- led_segment_bus = 8'b10000001;
- end
- 1: begin
- led_digit_select = 4'b1101;
- led_segment_bus = 8'b11001111;
- end
- 2: begin
- led_digit_select = 4'b1011;
- led_segment_bus = 8'b10010010;
- end
- 3: begin
- led_digit_select = 4'b0111;
- led_segment_bus = 8'b10000110;
- end
- endcase
- end
-endmodule
+// This file is part of the Universal Laboratory (uLab)
+//
+// © 2007 - 2019 Raptor Engineering, LLC
+// All Rights Reserved
+//
+// Licensed under the terms of the AGPL v3
+
+module guest_fpga_top(clk, reset, four_bit_input, four_bit_output, eight_bit_input, eight_bit_output, sixteen_bit_input, sixteen_bit_output, lcd_data_in_address, lcd_data_in_data, lcd_data_in_enable, led_segment_bus, led_digit_select);
+ input clk;
+ input reset;
+
+ input [3:0] four_bit_input;
+ output reg [3:0] four_bit_output;
+ input [7:0] eight_bit_input;
+ output reg [7:0] eight_bit_output;
+ input [15:0] sixteen_bit_input;
+ output reg [15:0] sixteen_bit_output;
+
+ output reg [5:0] lcd_data_in_address;
+ output reg [7:0] lcd_data_in_data;
+ output reg lcd_data_in_enable;
+
+ output reg [7:0] led_segment_bus;
+ output reg [3:0] led_digit_select;
+
+ reg [7:0] lcd_sample_counter = 48; // Create a sample LCD display counter register
+ reg [31:0] lcd_character_change_timer = 0; // Wait a certain number of cycles before loading a new character
+ reg [5:0] lcd_current_character = 0; // The current character's address
+
+ always @(posedge clk) begin
+ four_bit_output = four_bit_input; // Loopback
+ eight_bit_output = eight_bit_input[3:0] + eight_bit_input[7:4]; // Sample adder
+ sixteen_bit_output = sixteen_bit_input[15:8] * sixteen_bit_input[7:0]; // Sample multiplier
+
+ // Sample LCD display routine
+ lcd_data_in_address = lcd_current_character; // Character location on the LCD display
+ lcd_data_in_data = lcd_sample_counter; // Character code to display
+ lcd_data_in_enable = 1; // Enable data transmission
+
+ // Cycle through all character positions
+ lcd_current_character = lcd_current_character + 1;
+ if (lcd_current_character > 31) begin
+ lcd_current_character = 16;
+ end
+
+ // Cycle through the numbers 0 to 9 at one second intervals
+ lcd_character_change_timer = lcd_character_change_timer + 1;
+ if (lcd_character_change_timer > 6000000) begin // Wait one second in between character changes
+ lcd_character_change_timer = 0;
+ lcd_sample_counter = lcd_sample_counter + 1;
+ if (lcd_sample_counter > 57) begin // Character code for the digit 9
+ lcd_sample_counter = 48; // Character code for the digit 0
+ end
+ end
+ end
+
+ // 7-segment LED display driver clock generator
+ reg sseg_clock;
+ reg [10:0] sseg_clock_counter;
+
+ always @(posedge clk) begin
+ sseg_clock_counter = sseg_clock_counter + 1;
+ if (sseg_clock_counter > 1023) begin
+ sseg_clock_counter = 0;
+ sseg_clock = ~sseg_clock;
+ end
+ end
+
+ // 7-segment LED display driver
+ // led_segment_bus and led_digit_select are active low
+ // The bit sequence, MSB to LSB, is dp a b c d e f g
+ // Segment letters are taken from ug130.pdf page 15
+
+ // 0: 8'b10000001
+ // 1: 8'b11001111
+ // 2: 8'b10010010
+ // 3: 8'b10000110
+ reg [2:0] current_anode;
+ always @(posedge sseg_clock) begin
+ current_anode = current_anode + 1;
+ if (current_anode > 3) begin
+ current_anode = 0;
+ end
+
+ case (current_anode)
+ 0: begin
+ led_digit_select = 4'b1110;
+ led_segment_bus = 8'b10000001;
+ end
+ 1: begin
+ led_digit_select = 4'b1101;
+ led_segment_bus = 8'b11001111;
+ end
+ 2: begin
+ led_digit_select = 4'b1011;
+ led_segment_bus = 8'b10010010;
+ end
+ 3: begin
+ led_digit_select = 4'b0111;
+ led_segment_bus = 8'b10000110;
+ end
+ endcase
+ end
+endmodule